How To Use
• What to expect
The skin should be shaved, clean, dry and free of any powders, antiperspirants or deodorants.
1. Press the Power On/Off switch to turn Espil BSL-1 0 on.
2. Shortly after pressing the Power On/Off switch, the Ready Indicator Light will turn on, accompanied by a beep, to indicate that your Espil BSL-1 0 is ready for its first pulse.
3. Your Espil BSL-1 0 is automatically set to the lowest energy level.
4. Using firm pressure, apply the Applicator Tip to the skin. Be sure that the skin area you are about to treat is spread evenly and smoothly, and that the Applicator Tip is in full contact with the skin.
5. Press the Pulse Button to emit a pulse. You will then see a flash of light and hear a POP Sound. This is normal light pulse of Espil BSL-1 O.
6. After emitting a pulse, remove the Applicator Tip from the skin. Espil BSL -10 will recharge for the next pulse.
7. After approx. 4 - 7 seconds the Ready Indicator Light will turn on again, accompanied by a beep, to indicate that your Espil BSL-1 0 is ready for another pulse.
8. Continue to administer puises until the desired skin area is fully treated.
Benefits and Features
• 100-240 Universal Power
• Less noise Fan
• Long-term results
• Skin Color Sensor
• Cost Effective
• Effective on Women and Men
• Physician Recommended
• Safe & Easy to Use
• Privacy at Home
Disposable Lamp Cartridge
Espil BSL-1 0 Disposable lamp cartridge can deliver 3 ,000 - 5 ,000 shot that typically cover two legs,
arms, under arms, and bikini line. Energy intensity is determined only according to the energy level setting of the device. |
 |
The Skin Color Sensor
The Skin Color Sensor Light-based hair removal on darker skin tones can result in adverse effects such as burns, blisters, and skin color changes (hyper- or hypo-pigmentation). To prevent such misuse, a unique SKIN COLOR SENSOR in Espil BSL-10 measures the treated skin complexion at the beginning of each session and occasionally during the session. If the SKIN COLOR SENSOR detects a skin tone that is too d ark for Espil BSL-1 0 app lication, the device will automatically stop emitting pulses.
1ncludes
Unit, Lamp Cartridge, AC cord, Goggle, Manual
Espil IPL Hair Removal System BSL-IO
• What is Espil 6SL·10
Espil BSL-1 0 is based on IPL (Intense Pluses Light) technology which is regarded as the most effective and safest into day's markets. The FDA's definition of permanent hair reduction states that after the treatment is Finished a minimum of 30 months without any new growth must be observed. Espil BSL-10 is the most innovative light-based hair removal device for use in the privacy of your own home.
To achieve hair removal, it is necessary not only to destroy the hair but to destroy the stem cells that create the hair. It is important to understand that the hair is only a conduit for the light energy, and the target for successful permanent hair reduction is to destroy the stem cells that make the hair follicle. The Espil BSL-10 home hair removal device is a small, portable IPL. The specifications for the device include wavelengths of light from 475 to 1200 nm.
• Treatment Plan with Espil 6SL-10
Treatments should be carried out every 2 - 4 weeks for at least 3 sessions, and up to 7 - 8 if necessary. After 6 months of sessions full results(70 - 90%)should be achieved.
• Skin Tone Chart
Select the color below that best matches the color of the skin on the area you are treating. Don't use Espil BSL-10 on naturally dark skin. Treating dark skin with Espil BSL-1 0 can result in a dverse effects such as burns, blisters, and skin color changes.
(hyper- or hypo-pigmentation)
• Tips for your first treatment session with Espil 6SL-10
You should start with the Low setting for the first time and increase to the Medium or High settings based on your comfort level. Energy level determines the intensity of the Espil BSL-1 0 light pulse delivered to your skin, from the lowest level(-) to the highest level(+). As energy level increases, so does hair removal results as well as the risk of possible side effects and complications. You should use a lower setting if you are experiencing pain, the area is flushed, or has blotches.
• For your soft and shining skin!
• For your elastic and pure skin!
• This Is for you, dreaming of perfect skin!
About IPL Technology?
Espil BSL-10 is based on Intense Pulses light (IPL) technology that is a personal combined-energy based device for long-term hair removal. To achieve hair removal, it is necessary not only to destroy the hair but to destroy the stem cells that create the hair. It is important to understand that the hair is only a conduit for the light, and the target for successful permanent hair reduction is to destroy the stem cells that make the hair follicle. The Espil BSL-10 home hair removal device is a small, portable IPL. The specifications for the device include wavelengths of light from 475 to 1200nm.
Does the Espll BSL·10 hair remover deliver permanent results?
EsPil BSL-10 is based on IPL (Intense Pluses light) technology which is regarded as the most effective and safest in today's markets. It is important to understand more about IPL and how it works on the skin. As with any light-based or laser hair removal device, results are not immediate and may take a few treatments.
With 3 - 6 sessions, a 70-90% success rate in the treated area is typically achieved. Every hair in our body goes through the three phases of the hair growth cycle: Anagen, Catagen and Telogen. These phases have an important impact on how the process of light-based hair removal works. Anagen(84%) is the hair growth phase while Catagen(2%) and Telogen (14%), are both resting phases. At any given moment the majority of the hair follides in any skin area are in the resting stages. These resting hairs cannot be effected by laser or light hair removal treatment. However hairs in the growing Anagen phase respond. It is therefore important to understand that it may take a full hair growth cycle to achieve complete results when doing any energy based hair removal. This heat doesn't destroys the stem cellstpapilla) responsible for hair growth in the resting phases(Catagen and Telogen). This is one of the main reasons that multiple treatments are required to achieve the desired result for any energy based treatment.
How often should I use Espll BSL·10?
As with any light-based or laser hair removal device, results are not instant, and you might think nothing has been achieved at all. Treatments should be carried out every 2-4 weeks for at least 3 sessions, and up to 7-8 if necessary. After 6 months of sessions full results (70-90%) should be achieved.
Are there any side effects to using the Espil BSL·10?
When used according to the instructions, side effects and complications associated with use of Espil BSL-10 are uncommon. However every cosmetic procedure, including those designed for home use, involves some degree of risk. You may experience some tingling, burning, itching, red spots, darker pigmentation, or mild pain when using this device. Some discomfort is normal.
Will Espil BSL·10 hurt?
When used properly most users of Espil BSL-10 report feeling a slight sensation of heat at the time of the pulse of light. Energy level refers to the intensity of the light pulse that is projected on your skin during use, from the lowest level(-) to the highest level(+). Indicator lights on the control panel illustrate the energy level at which the machine is set. As the energy level increases, so do the results of Espil BSL-10 as well as the risk of side effects. Always begin your first use of Espil BSL-10 at the lowest energy setting(one light at"-")! Only if you experience little or no discomfort during and after use of Espil BSL-10, and so on for each subsequent hair removal session.
Users with thicker and darker hair may feel slightly more discomfort, but this discomfort subsides once the hair removal session is completed. Shave the skin area before using Espil BSL-10. Shaving may reduce the tingling, burning, or pain during use.
If the area being treated or the filter on the cartridge is dirty it could cause the device to hurt more. So the area being treated should be shaved well and the filter deaned by wiping it with dry a cloth.
Where on the body can Espll BSL·10 be used?
The Espil BSL-10 device has been designed for body treatments anywhere below the neck. The most common areas treated with Espil BSL-10 are: legs, underarms, arms and bikini line for women! Chest, back, legs, and arms for men. Espil BSL-10 is not recommended for use on the face, and may not be suitable for everyone. The Espil BSL-10 also should not be used on the face, as this may cause unwanted hair growth or damage to the eyes. Since treating the face may result in serious side effects, we recommend treatment by a clinic.
Is Espll BSL·10 effective on white, grey or blonde hairs?
Espil BSL-10 works best on darker hair types, or hair that contains more melanin. Melanin is the pigment that gives hair and skin irs color, and will absorbs light more effectively. Black and dark brown hair respond the best, although brown and light brown hairs will also respond but typically require more sessions for the desired results.
